Brother DCP8152DN Printer Repair

Brother DCP8152DN Printer Repair

Code: 0B00

  • Description:There was no response from the panel for the specified time for any reason.
  • Causes:1 Panel PCB failure. 2 Touch panel PCB failure. 3 Main PCB failure
  • Remedy:1 Panel PCB failure Replace the panel PCB ASSY. 2 Touch panel PCB failure Replace the touch panel PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: 0C01, 0C02, 0C03, 0C04

  • Description:Log registration failed.
  • Causes:1 Main PCB failure
  • Remedy:Replace the main PCB ASSY.

Code: 0E00

  • Description:Communication between the panel PCB and the main PCB cannot be established at machine startup.
  • Causes:1 Connection failure of the panel PCB harness. 2 Panel PCB failure. 3 Touch panel PCB failure. 4 Main PCB failure.
  • Remedy:1 Connection failure of the panel PCB harness Reconnect the panel PCB harness. 2 Panel PCB failure Replace the panel PCB ASSY. 3 Touch panel PCB failure Replace the touch panel PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.

Code: 0F00

  • Description:The back cover sensor detected that the cover was open in duplex printing mode.
  • Causes:1 Connection failure of the back cover sensor harness. 2 Back cover sensor attachment failure. 3 Broken rib (on the right inside the back cover) where the back cover switch is pressed. 4 Damaged duplex tray. 5 Back cover sensor failure. 6 Main PCB failure
  • Remedy:1 Connection failure of the back cover sensor harness Check the connection of the back cover sensor harness, and reconnect it if necessary. 2 Back cover sensor attachment failure Reattach the back cover sensor. 3 Broken rib (on the right inside the back cover) where the back cover switch is pressed Replace the back cover. 4 Damaged duplex tray Replace the duplex tray. 5 Back cover sensor failure Replace the back cover switch harness ASSY. 6 Main PCB failure Replace the main PCB ASSY.

Code: 3600

  • Description:An error occurred in the high-voltage power supply PCB.
  • Causes:1 High-voltage power supply PCB failure. 2 Main PCB failure
  • Remedy:1 High-voltage power supply PCB failure Replace the high-voltage power supply PCB ASSY. 2 Main PCB failure Replace the main PCB ASSY.

Code: 3B00

  • Description:An error occurred during access to the DRAM in the main PCB.
  • Causes:1 Main PCB failure
  • Remedy:Replace the main PCB ASSY.

Code: 4400

  • Description:The toner sensor detected that the toner cartridge was not set.
  • Causes:1 Toner sensor PCB failure. 2 Relay front PCB failure. 3 Main PCB failure
  • Remedy:1 Toner sensor PCB failure Refer to “1.3.10 Check sensor operation (function code: 32)” in Chapter 5 to check the sensor operation. If the sensor operation is faulty, replace the toner sensor PCB ASSY. 2 Relay front PCB failure Replace the relay front PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: 5000

  • Description:The number of rotations of the drum unit has reached the life limit. (Printing does not stop.)
  • Causes:1 Replace the drum unit with a new one and reset the drum counter. If the error display is not cleared, the main PCB is faulty.
  • Remedy:Replace the main PCB ASSY.

Call On Our Technical Support Phone Number For  Brother DCP8152DN Printer Repair Services @ USA : +855-534-1508, Right Now to Get Instant Help

Brother DCP8152DN Printer Repair